General Description
The J Line is the ultimate pumping solution for fluids with very low or no flowability. Designed with an open-throat hopper and sloped walls, it ensures material drops directly onto a large-diameter feed auger.
This heavy-duty auger forcibly feeds the fluid into the rotor/stator assembly, eliminating the risk of cavitation. It is ideal for dense sludge, pastes, wine must, and waste streams that other pumps simply cannot process. We also offer bridge-breaker accessories for materials prone to bridging or caking at the inlet.
Technical Specifications
| Max Flow Rate | Up to 136 m³/h (600 GPM) |
|---|---|
| Max Pressure | Up to 17 bar (250 PSI) | Available in 1, 2 & 3 Stages |
| Inlet Design | Open Hopper with Feed Auger (Custom sizes available) |
| Housing Material | Carbon Steel or Stainless Steel |
| Rotor Material | Hardened Tool Steel or Stainless Steel (Hard Chrome Plated) |
| Available Stators | Buna-N (Nitrile), Viton®, EPDM, and Natural Rubber |
| Shaft Seal | Standard Packing with Lantern Ring (Mechanical seal optional) |
- Effluent Treatment: Handling of sewage sludge and filter press feed.
- Paper & Timber Industry: Transfer of paper pulp and thick polymers.
- Food & Brewing Industry: Pumping of wine must, organic waste, and spent grain.
- Chemical Industry: High-viscosity pastes and solutions with extreme solids loading.
The hopper geometry (length, width, and sloped-wall height) can be custom-designed to perfectly match your process discharge or existing silo size. We manufacture complete, ready-to-operate steel baseplate assemblies.
Why choose the J Line?
Need help sizing your hopper?
Contact Engineering
